manualshive.com logo in svg

Samsung PDP4294X/SMS, Руководство по обслуживанию

Поделиться
Скачать
Samsung PDP4294X/SMS Скачать руководство пользователя страница 82

Circuit Operation Description

5-68

Samsung Electronics

6. AD9883 (IC705) - A/D CONVERTER 

  

Check when the input mode is for Component 1

or 2 (HD-level) and PC.

(1) Check whether the proper power is supplied. (3.3V)
(2) Check I

2

C-BUS (pins 56 and 57).

(3) Check whether the video input signals (pins 43, 48, 54) and the H (pin 30) and

V (pin 31) input signals are normal.

(4) Check whether the data outputs are normal.

R, G, B digital data outputs (RW708~RW713),  ASI_SUB_H (pin 66) : 45KHz (for 720P),
ASI_SUB_V (pin 64) : 60Hz,  ASI_SUB_CLK (pin 67)

7. SII169CT100 (IC702) - TMDS RECEIVER   

  

Check the when the input mode is for DVI.

(1) Check whether the proper power is supplied. (3.3V)
(2) Check whether the power down pin’s (pin 2) output is High.
(3) Check whether the DVI inputs are normal.
(4) Check whether the data outputs are normal.

R, G, B digital data outputs (RW701~RW706),  DVI_HSYND (pin 48), DVI_VSYNC (pin 47),
DVI_CLK (pin 44),  DVI_DE (pin 46)

8. ASI500 (IC501) - SCALER

(1) Check whether the proper power is supplied. (3.3V, 2.5V) - Since it is BGA IC, measure the

R or C parts on the power terminals.

(2) Check whether the inputs and outputs between ASI500 and MEMORY (IC502, IC503) 

are normal.

(3) Check whether the outputs of FLI2200, AD9883, and SII169CT100 are input into ASI500 

are normal.

(4) Check whether the data outputs are normal.

R,G,B digital data outputs (RW501~RW506),  MN_IN_H (RW507),  MN_IN_V (RW507),
MIN_IN_CLK (RW507)

9. DNIe (IC601) - PICTURE ENHANCER

(1) Check whether the proper power is supplied. (3.3V, 2.5V)
(2) Check whether the Reset pin’s output is High. (pin 74)
(3) Check  I

2

C-BUS (pins 1 and 2)

(4) Check whether te outputs of ASI500 are input into DNIe normally.

(Digital R, G, B and HSYNC, VSYMC, CLK)

(5) Check whether the data outputs are normal.

R, G, B digital data outputs (RW602~RW607),  OUT_HSYNC (pin 10),
OUT_VSYNC (pin 9), OUT_CLK (pin 12)

10. DS90C385 (IC603) - LVDS TRANSMITTER

(1) Check whether the proper power is supplied. (3.3V)
(2) Check wether the power down pin’s (pin 32) output is High.
(3) Check whether the outputs of DNIe are input into DS90C385 normally.
(4) Check whether the LVDS data outputs are normal.

Содержание PDP4294X/SMS









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды