Samsung PC4NBDMAN, Руководство по установке

Страница: 3 / 8

3
English
Installing the panel front for the
ceiling type
1 Remove the four cover panels from the panel front.
NOTE
ŷ
To remove the cover panels, use the two tongues at
the ends of each cover panel.
2 Push the four corners of the panel front toward the
indoor unit body one at a time until you hear “click”
so that they are assembled in place.
NOTE
ŷ After assembling the panel front in place, you can
slightly adjust its position left and right. If required,
adjust the position of the panel front so that it aligns
with the ceiling opening.
3 Push the centres of the four sides of the panel front
toward the indoor unit body one at a time until you
hear “click” so that they are hooked in place.
4 Insert halfway the four screws into the four holes on
the panel front. Then fasten the screws tightly until
there is no gap between the ceiling and the panel
front.
5 Place each cover panel on a corner of the panel front.
Then push the cover panel upward until it is firmly
assembled to the panel front.
6 Check whether the panel front is firmly fixed to the
indoor unit body.
NOTE
ŷ Make sure that the screws are fastened tightly until
there is no gap between the ceiling and the panel.
ŷ If the panel is installed incorrectly, air may leak out.