Samsung P560, Руководство по обслуживанию, Страница: 32 / 393

2-28
2. Introduction and Specification
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
Boot
Boot Device Priority
Select system boot options.
NumLock
Selects Power-on state for Numlock.
Enable Keypad
Select a method of Keypad.
- [Only By Fn Key] : Leave the embedded keypad disabled when the Numlock LED is on.
- [By NumLock] : Enable the embedded keypad when Numlock LED is on and no external keyboard is attached.
Summary Screen
Display system configuration on boot.
Boot-time Diagnostic Screen
Display the diagnostic screen during boot.
PXE Oprom
This selects whether network boot PXE will be loaded or not during the POST.
- [Only with F12] : The network boot PXE will be loaded only if F12 is pressed during the POST.
- [Always] : The network boot PXE will be always loaded during the POST.
Brightness Control Mode
[Auto] : The brightness values are set by the status of AC adapter at each bootup.
[User Control] : The brightness values could be remained regardless of the status of AC adapter.
Wireless Device Control
[Always On / Off] : The wireless devices are turned on or not.
[Last Status] : The wireless devices are restored to last status.
Smart Battery Calibration
If you select this option, the system battery will be discharged completely for more accurate battery level detection.
This option only works with SMART battery.
Phoenix SecureCore(tm) Setup Utility
Main Advanced Security TPM State Boot Exit
Item Specific Help
 Boot Device Priority
NumLock [OFF] Select system boot
options
Enble Keypad [By NumLock]
Summary screen [Disabled]
Boot-time Diagnostic Screen [Disabled]
PXE OPROM [Always]
Brightness Mode Control [Auto]
Wireless Device Control [Always On]
Smart Battery Calibration
F1
Help

Select Item
F5/F6
Change Values
F9
Setup Defaults
ESC
Exit  Select Menu
Enter
Select  Sub-Menu
F10
Save and Exit
•
•
•
•
•
•
•
•
•
•
•