CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-178
[607] UCD OPTIONS
Sets up UCD options when an AA card has been installed. MMC 601 must have already
been used to define a UCD group with an overflow destination of an AA port or group.
(A group is preferred over a port because a group allows multiple paths into the AA card
and therefore has greater traffic handling capabilities.) When the group overflow timer in
MMC 601 expires, the caller will be routed to the AA card. It is here that the caller is
played the UCD ‘FIRST MESSAGE’ and ‘SECOND MESSAGE’ while in queue. This will
continue until an agent becomes free or the caller is transferred to a final destination.
The following program options apply:
No
Option
Description
00
FIRST MESSAGE
After the caller has overflowed from the UCD group, the first
message will immediately play.
This message will only be played once for the caller.
01
SECOND MESSAGE If no agent has become free after the UCD recall time(see UCD
Recall Time), the caller will be played the second message.
This message will be repeated for as long as the caller is in
queue, at an interval specified in the UCD Recall timer below.
02
EXIT CODE
While the caller is hearing a message (but not during MOH),
the caller may dial the DTMF digit specified here and be trans-
ferred immediately to the final destination (see Final Destination).
The exit code is optional and does not need to be used. If used,
the first and second messages may be modified to provide in-
structions on its use.
03
RETRY COUNT
The UCD program is designed to route a caller to a
‘
final destina-
tion
’
after a programmable number of
‘
loops
’
through the UCD
message. The range of this counter is 0 to 99. 00 means that
there is no retry counter and the caller will remain in the UCD
queue until answered. Any non zero value will route a caller
through the UCD loop that many times before going to the final
destination. The UCD will route calls to the final destination im-
mediately if all members of the group are either out of group or in
DND.
Example: If this counter is set to 02, callers reaching a busy
group will hear the first UCD message, be placed on hold, hear
the second UCD message, be placed on hold, and finally hear
the second message again before being transferred to the final
destination.
Содержание OfficeServ 7200
Страница 1: ...OfficeServ 7200 Guide Enterprise IP Solutions Programming ...
Страница 190: ...CHAPTER 2 MMC Programming OfficServ 7200 Programming Guide Samsung Business Communications 2 159 RELATED ITEMS NONE ...
Страница 315: ...CHAPTER 2 MMC Programming OfficServ 7200 Programming Guide Samsung Business Communications 2 284 RELATED ITEMS NONE ...
Страница 409: ...Samsung Business Communications Brookside Business Park Greengate Middleton Manchester M24 1GS ...