Samsung NZ64R1705CK, Руководство пользователя и инструкция по установке, Страница: 22 / 31

22 English
Be
for
e y
ou s
tar
t
Before you start
Heat setting Safety switch off after
1-2 6 Hours
3-4 5 Hours
5 4 Hours
6-9 1.5 Hours
Timer Function
Cooking Zone Timer (1 - 99 min.)
When the hob is switched on, an
independent timer can be programmed
for each cooking zone.
Select a cooking zone, then select the
temperature setting and, finally, activate
the timer setting button , the timer can
be programmed to switch off a cooking
zone. Four LEDs are arranged around the
timer that indicate which cooking zone
the timer has been set for.
10 seconds after the last operation, the
timer display will change to the timer
that will run out next (in cases where a
timer is set for more than one cooking
zone).
When the timer has run down, a signal
will sound, the timer display will show
´
00
` and the assigned cooking zone timer
LED will blink. The programmed cooking
zone will switch off and “
H
” will be
displayed if the cooking zone is hot.
The sound signal and the blinking of the
timer LED will stop automatically after 2
minutes and/or by pressing any button.
Buzzer
While the hob is in operation, the
following activities will be signalled by
the buzzer.
• Normal button activation will be
accompanied with a short sound
signal.
• Continuous button operation over a
longer period of time (10 seconds)
will be accompanied with a longer,
intermittent sound signal.
Boost Function
To use this function, select a cooking zone
and set the desired cooking level, then
press the “
P
” (Boost) button.
The Boost function can only be activated
if it is applicable with the cooking zone
selected. If the Boost Function is active,
a “
P ” is shown on the corresponding
display.
Activating the booster can exceed the
maximum power, in which case the
integrated power management will be
activated.
The necessary power reduction is
shown by the corresponding cooking
zone display blinking. Blinking will be
active for 3 seconds to allow for further
adaptations of the settings before power
reduction.