Samsung NZ63K7777BK, Руководство пользователя

Страница: 41 / 64

English 9
Ins
talling the hob
04
05
06
07
08
09
10
11
12
02
03
01
No. Explanation Size
01 Check 4 Point
02 Drill diameter Ø 6
03 Right angle of cutting point 90 °
04 Cutting Width Size 560±1 mm
05
Cutting Depth Size 490±1 mm
06 Curve Size R3
07 Size of table thickness Max 50 mm,
Min 20 mm
08 Distance between end of table and cutting point
(Rear-side)
Min 60 mm
09 Depth of table Min 600 mm
10 Distance between end of table and cutting point
(Left-side)
Min 60 mm
11 Distance between end of table and cutting point
(Right-side)
Min 60 mm
12 Distance between end of table and cutting point
(Front-side)
Min 50 mm
Installing into the countertop
A
A. Serial number
NOTE
Make a note of the serial number on the
appliance rating label prior to installation.
This number will be required in the case
of requests for service and is no longer
accessible after installation, as it is on the
original rating plate on the underside of the
appliance.
NOTE
Pay special attention to the minimum space and clearance requirements.
NOTE
The bottom of the hob is equipped with a fan. If there is a drawer under the hob
it should not be used to store small objects or paper, since they could damage the
fan or interfere with the cooling if they are sucked into it.
01
02
No. Explanation Size
01 Height of
ventilation hole
Min 2 mm
02 Width of
ventilation hole
560 mm
NZ63K7777BK_ET_DG68-00803A-04_EN.indd 9 2017-05-26 11:14:43