English - 35
04 t
ool
S
AN
d m
Ate
R
iA
lS
& i
NS
tA
ll
Atio
N
iNS
tR
uc
tio
NS
checking the flame quality:
All combustion flames need to be visually checked to determine their flame
quality.
1. Soft blue flames
—Normal for natural gas operation.
2. Yellow tips on outer cones
—Normal for LP gas
operation.
3. Yellow flames
—Abnormal for any gas operation; call
for service.
If burner flame looks like 3, the range should
not be used until it is serviced. Call for
service. Normal burner flames shall look like 1
1
or 2, depending on the gas type you use.
Step 10. Final installation checklist
You have just completed installing your range. Make sure all controls are in the off
position and the flow of ventilation air to the range is unobstructed. The following
is a checklist to confirm your range is safely installed and ready for operation.
-
Gas line has been properly connected to the range.
The gas has been turned on. All connections have been
checked for leaks.
-
Range is plugged into the properly grounded electrical
receptacle.
-
Approved anti-tip bracket is properly installed
and engaged with the range.
-
Range is leveled and is firmly sitting on a solid,
level floor.
-
Gas surface burners have been properly
assembled.
-
All burners have been tested for proper
operation.
-
FOR INSTALLER ONLY—Check and/or adjust the broil and oven burner
flames as described in this manual.
Gas Range
Plug
Locking screw
Install_NX58H9500WS_AA_AC_DG68-00555A-00_EN-140509.indd 35
2014-05-11 �� 9:30:45
