56 Users Manual
Configuring the Password
Setting the Supervisor Password
By configuring a supervisor password, you can restrict system access to authorized
users only.
1.
Select the Security menu in the System Setup. To enter System Setup, see “Starting
System Setup” on page 54.
2.
On the
Set Supervisor Password
item, press
<Enter>
.
3.
Enter a password, press
<Enter>
, re-enter the password for confirmation, and
press
<Enter>
again.
4.
When a message confirming the password configuration appears in the [Setup
Notice] window, press
<Enter>
.
Setting the User Password
You can configure user passwords so that other users can use the system.
Before configuring a user password, a supervisor password must have been
configured.
Users can start the system with their user password, but cannot enter into the
System Setup.
Deactivating the supervisor password also deactivates the user password.
On the
Set User Password
item, press
<Enter>
, and complete step 3-4 of "Setting the
Supervisor Password".
Activating the Booting Password
Before activating the booting password, the supervisor password must have
been configured.
Set the
Password on boot
option to [Enabled].
From now on, system booting will not proceed without the password.
