English 39
Maint
enanc
e
03
5.
Remove the third sheet from the door in
the arrow direction.
6.
Clean the glass with soapy water and a
clean cloth.
02
03
01
01
Support clip 1
02
Support clip 2
03
Support clip 3
7.
When done, reinsert the sheets as
follows:
• See the picture and locate the hinges.
Insert sheet 3 below support clip 1,
sheet 2 between support clip 1 and 2,
and sheet 1 into support clip 3 in this
order. Make sure the printed side of
sheets is inserted inward.
CAUTION
To identify the correct side of the sheet,
locate the “PYRO” mark on the corner of
every sheet.
Correct direction: PYRO-**-**
Wrong direction:
8.
After insert the sheet 2, press down the
glass clips and check if they secure the
glass sheet properly.
9.
Follow steps 1-2 above in the reverse
order to reinstall the coverings.
WARNING
To prevent heat leaks, make sure you propery reinsert the glass sheets.
Door glass
Depending on the model, the oven door is equipped with 3-4 sheets of glass
placed against each other. Do not remove the door glass unless for cleaning
purposes. To remove the door glass for cleaning, follow these instructions.
1.
Use a screwdriver to remove the screws
on the left and right sides.
01
2.
Detach the coverings in the arrow
directions
3.
Remove the first sheet from the door.
02
4.
Remove the second sheet from the door
in the arrow direction.
NV75K5571RM_EU_DG68-00738B-00_EN.indd 39
3/11/2016 4:45:55 PM
