<< 13 >>
Connecting to a Power Source
You can charge the rechargeable battery (SLB-1137D) by using an
SAC-47 KIT. The SAC-47 KIT consists of the AC adapter (SAC-47) and
the USB cable (SUC-C4). When the AC adapter and the USB cable are
assembled, it can be used as an AC cable.
●
Using the SAC-47 as an AC charger
: Insert the AC adapter into the USB
connector.
When the AC adapter is inserted, it can be
used as an AC charger.
●
Using the SAC-47 as an USB cable
: Remove the AC adapter from the USB
cable (SUC-C4). You can transmit data with
a PC (p.84) or charge the battery.
In the following cases, the battery may not be charged.
●
When using a USB cable that was not supplied with this camera.
Use the supplied USB cable (SUC-C4).
●
When using a USB hub. Connect the camera to the PC directly.
●
When other USB devices are connected to the PC.
Disconnect the other USB devices.
●
When the USB is connected to the USB port located on the front of
the computer. Use the USB located on the back of the computer.
●
If the USB port of the PC doesn’t meet the Power output standard
(4.2V, 400mA), the camera may not be charged.
