Samsung NSG6 83 Series, Руководство пользователя

Страница: 17 / 168

English 17
C
ookt
op
Gas burners
RF
RR
LF
LR
C
Each burner has a corresponding knob
that lets you to set the flame level from Lo
to Hi. In addition, each burner knob has a
Lite setting. Turning a knob to Lite ignites
the corresponding burner. The burner
indicators are located above each knob
and show which burner the knob controls.
Each burner is designed for specific cooking
purposes. See the table below.
Position Purpose Food type Characteristics
Right Front (RF)
17,000 BTU
Power heating Boiling food Maximum output
Right Rear (RR)
5,000 BTU
Low simmering
Chocolate,
casseroles, sauces
Delicate food that
requires low heat
for a long time
Center (C)
10,000 BTU
General heating/
Griddling
General food/
Pancakes, fried
eggs
General-purpose
cooking
Left Front (LF)
16,000 BTU
Quick heating General
General-purpose
cooking
Left Rear (LR)
9,500 BTU
General heating/
Low simmering
General food,
casseroles General-purpose
cooking
Ignition
CAUTION
3
2
1
1
Make sure all surface burners are properly
installed. To light a burner:
1. Press the button integrated into the
knob.
2. While pressing the button, push in the
control knob and then turn it to the Lite
position. You will hear a "
Clicking " sound
indicating the electronic ignition system
is working properly.
3. After the surface burner lights, turn
the control knob to shift it out of the
Lite position and turn off the electronic
ignition system.
4. Turn the control knob to adjust the flame
level.
Manual ignition
If there is a power failure, you can ignite the burner manually. Use caution when
doing this.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in the control knob for that burner, and then turn it to the Lite position.
Turn on the grill lighter to ignite the burner.
3. After the burner is lit, turn the control knob to adjust the flame level.