22
AA
In order to set the indoor unit option code using the wired remote controller, hold down the
and
buttons at the same time for 5 seconds.
Setting the indoor unit option code
1
The menu will display .
Press the
button to enter the indoor unit option code
mode.
2
Press the
button to change the page. You can change the
page from 0 to 3.
3
Press the
buttons and the
button to set the option
code in order.
4
Press the
button to save the changed setting.
You will move to the menu selection display.
Page No.
Option code
• Option code will not be applied if you don’t press the
button.
• Setting indoor unit option code is only possible in Master wired remote controller.
You can only check the indoor unit option code in Slave wired remote controller.
• Setting indoor unit option code is possible when one indoor unit is connected. If more than 2 indoor
units are connected, you can only check the Master indoor unit option code.
• The first digit represents the page number and the remaining five
digits are option codes.
• The option code which is currently setting will flicker.
• Press the
button anytime during setup to exit without setting.
Setting the option code with wireless remocon is availble if receiver kit is installed. Please use the proper wireless
remocon such as MR-DH00 which set 24 digit option code. Following is the instruction of setting option code with wired
remocon(WMR-WH02).
Содержание NS071LDXEA
Страница 1: ......
Страница 29: ...29 ENGLISH Memo ...
Страница 30: ... EEE Yönetmeliğine Uygundur This EEE is compliant with RoHS ...
