manualshive.com logo in svg

Samsung NP35, Руководство пользователя

Поделиться
Скачать
Samsung NP35 Скачать руководство пользователя страница 47

34  Users Manual

To use a memory card in both the computer and other digital device such as 
a digital camera, it is recommended to format the memory card in the digital 
device. If you format the memory card in the computer, you may have to format 
the memory card in other digital device again to use the memory card in the 
digital device.

To format a Memory Stick in Windows 2000, Me, or 98SE, install the Memory 
Stick Formatter software included in the system software CD.

To use a Memory Stick Duo

Insert a Memory Stick Duo into the Memory Stick Duo adapter and insert the 
adapter into the Memory Stick slot of the computer.

To Re-install the Memory Stick (Card) Driver

The Memory Stick (Card) needs to be removed prior to installing the driver.
If the driver is installed when the Memory Stick (Card) is installed, remove the 
Memory Stick (Card), then select Start > Control Panel > System > Hardware 
tab > Device Manager, remove Other Device and re-install the Memory Stick 
(Card) driver using the System Software CD.

Содержание NP35






















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды