background image

78

Chapter 4 

Appendix

Canada

Unintentional Emitter per ICES-003

This digital apparatus does not exceed the Class B limits for radio 

noise emissions from digital apparatus as set out in the radio 

interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits 

radioélectriques dépassant les limitesapplicables aux appareils 

numériques de Classe B prescrites dans le règlement sur le 

brouillage radioélectrique édicté par Industrie Canada.

Intentional Emitter per RSS 210

This device complies with RSS 210 of Industry Canada. Operation 

is subject to the following two conditions: (1) this device may not 

cause interference, and (2) this device must accept any interference, 

including interference that may cause undesired operation of this 

device.”
L‘ utilisation de ce dispositif est autorisée seulement aux 

conditions suivantes : (1) il ne doit pas produire de brouillage et (2) 

l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage 

radioélectrique reçu, même si ce brouillage est susceptible de 

compromettre le fonctionnement du dispositif.

The term “IC” before the equipment certification number only 

signifies that the Industry Canada technical specifications were 

met. To reduce potential radio interference to other users, the 

antenna type and its gain should be so chosen that the equivalent 

isotropically radiated power (EIRP) is not more than that required 

for successful communication. To prevent radio interference 

to the licensed service, this device is intended to be operated 

indoors and away from windows to provide maximum shielding. 

Equipment (or its transmit antenna) that is installed outdoors is 

subject to licensing.
Pour empecher que cet appareil cause du brouillage au service 

faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait 

etre place loin des fenetres afin de Fournier un ecram de blindage 

maximal. Si le matriel (ou son antenne d’emission) est installe a 

l’exterieur, il doit faire l’objet d’une licence.

(If fitted with 2.4G band or 5G band) 
Low power, Radio LAN type devices (radio frequency (RF) wireless 

communication devices), operating in the 2.4GHz/5GHz Band, may 

be present (embedded) in your notebook system. This section is 

only applicable if these devices are present. Refer to the system 

label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for 

use in Canada if an Industry Canada ID number is on the system 

label.

Regulatory Compliance Statements

Содержание NP-N100
































































































Отзывы: