Samsung NK24N7060VB, Руководство пользователя

Страница: 8 / 20

8 English 9 English
7. REPLACING THE BULB
Always switch off the electrical
supply before carrying out
any operation
LED bulb does not operate is
possible to remove as shown
in
Figure 12
A new bulb to be supplied
from service points is replaced
with the same reoperation.
Cables are designed with
sockets.
Note: Remove the holder on the LED bulb as shown in Figure 12.2 . Put the
new LED bulb on the holder housing of the LED bulb you removed as shown
in
Figure 12.1 .
8. MAINTENANCE OF THE CHIMNEY HOOD
• Device should be unconnected or switch should be turned off before
cleaning and maintenance procedu
•
Metal filter should be cleaned once a month with hot soapy water or
in the dishwasher, if possible. (60 °C)
•
Remove the aluminum cartridge filter by pressing on the spring
catches on the side. Do not refit before drying after wash.
•
Outer surface of the extractor hood should be wiped with a damp
cloth soaked with soapy water.
•
Make sure electronic parts do not contact with water or similar
materials.
•
For inox products, using inox cleaning and maintenance products
available in the market will provide longer usage life for your device.
•
Aluminum filters can be washed in dishwasher. After several washes,
aluminum filters may change colour. This is normal and filters do not need
to be replaced.
•
For Replacement of LED Lamp, contact the technical service.
WARNING
: When used with devices which use fuel (heaters working
with gas, diesel fuel, coal or firewood, water heaters, etc) and the air in the
environment; should be used cautiously. The chimney hood sending the air
out in the environment may affect the burning adversely.
This warning is not applicable to non-ducted use.
Efficient Use Of Chimney Hood;
• When installing the chimney hood to the air duct, use 150/120 mm
diameter pipes and use bends as minimum as possible.
• Be ware of cleaning periods of metal filters and replacing times of
charcoal filters.
• When dense suction power is not required, use the product in
medium setting.
• For right ventilation, the windows in the kitchen leading to the
outside should be kept closed.
9. IF CHIMNEY HOOD DOES NOT WORK;
Before contacting the service, make sure the product is connected and the
fuse in the electrical installation is working. Do not do anything that may
harm the product.
1
2
Red
Black
Figure 12
Chimney Hood
does not work
Light bulb is
not working
Chimney hood air
suction is poor
Do not send air out
(in non-ducted
cases)
Check elec
tricity c
onnec
tion (mains v
olt
ag
e should
be
220-240
V
, Chimne
y hood
should
be c
onnec
ted t
o
gr
ounding sock
et
.)
Check mo
tor s
wit
ch (Mo
tor s
wit
ch should be on.)
Check bulb s
wit
ch (Bulb s
wit
ch should be on.)
Check bulb
s (Bulb
s should be in w
orking c
ondition.)
Check aluminum filt
er (Aluminum c
ar
tridg
e filt
er
should be w
ashed onc
e a month in normal use
.)
Check air ou
tle
t shaf
t (Air ou
tle
t shaf
t should be
unblock
ed.)
Check char
coal filt
er (Char
coal filt
er
s should be
replac
ed quar
terly in normal use
.
Maint
enanc
e o
f the chimne
y hood