English 63
Tr
ouble
shoo
ting
Displayed code
Possible cause
Solution
Displayed if the cookware on an
element is unsuitable or too small
or no cookware has been placed on
the cooking zone.
Check the cookware
Displayed if an element knob was
set to an On position when the
Sabbath or Self-clean mode has
ended or been cancelled, and the
burner was not able to detect pan
during 30 seconds.
To return the display
to normal and use the
cooktop, turn the knob
to the Off position.
This code appears if the internal
temperature of a burner rises
abnormally high.
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
COOKTOP
Displayed code
Possible cause
Solution
This code occurs if communication
between the Main and Inverter PBA
is interrupted.
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
The top sensor is open when the
burner is operating.
Call for service
The top sensor is short when the
burner is operating.
The IGBT sensor is open when the
burner is operating.
The IGBT sensor is short when the
burner is operating.
This code occurs if the DC fan motor
is open or locked.