19
3. Disassembly and Reassembly
3-8 Removing Lamp
WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Explanation Photo
Lamp
Explanation
1.
Disconnect power.
2.
Remove oven door.
3.
Turn the glass bulb cover in the oven counterclockwise to remove.
4.
Turn bulb counterclockwise to remove from socket.
5.
Replace bulb and cover by turning clockwise.
CAUTION
Be careful not to scratch or chip the oven liner paint when to remove the oven light
socket in the next step.
Explanation Photo
Explanation
To replace socket assembly:
6.
Disconnect the wires from the socket
terminals.
7.
Use a screwdriver and bend the clips on
the socket away from the edges of the
liner hole(there are 6 clips on the socket),
and pull the socket out of the liner. Push
the socket out from the rear of the unit.
* Reassembly of All part is the reverse order of disassembly.
Screw
- Terminal Block Screw : M4 X 18.
- The others : M4 X 12.