E-
22
SW01
SW02
SW03
SW04
SW05
SW06
SW07
Indoor Unit Setting
Before installing the indoor unit, assign an address to the indoor unit according
to the air conditioning system plan.
1
The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02) and
RMC(SW03, SW04) rotary switches.
2
Setting Main Address
The MAIN address is for communication between the indoor unit and the
outdoor unit. Therefore, you must set it to operate the air conditioner properly.
You can set the MAIN address from ‘00’ to ‘99’ by mixing SW01 and SW02.
The MAIN address from ‘00’ to ‘99’ should differ from each other.
Check the indoor unit address on the plan that you are to install and set the
address according to the plan.
Setting RMC Address
The SW03 and SW04 RMC switch is the address setting switch for controlling
the indoor unit with the centralized controller.
You must set the SW03, SW04 and K2 switch when using the centralized
controller.
You don’t have to set the SW03 and SW04 RMC switch when not using the
centralized controller.
You may not need to set main address if you selected Auto
Address Setting from the outdoor unit: see details on the
outdoor unit installation manual.
Note
The designs and shape are subject to change
according to the model.
When MAIN address is set as "12".
For Example
When RMC address is set as "12".
For Example
SW03
SW04
AVXDU@@_IM_E_33764A-1_110621.indd 22
2011-06-23 오전 10:14:36