Samsung NC108, Руководство пользователя

Страница: 34 / 80

34
Canada
Unintentional Emitter per ICES-003
This digital apparatus does not exceed the
Class B limits for radio noise emissions
from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas
de bruits radioélectriques dépassant les
limitesapplicables aux appareils numériques
de Classe B prescrites dans le règlement
sur le brouillage radioélectrique édicté par
Industrie Canada.
Intentional Emitter per RSS 210
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio
frequency (RF) wireless communication
devices), operating in the 2.4GHz/5GHz
Band, may be present (embedded) in your
notebook system. This section is only
applicable if these devices are present. Refer
to the system label to verify the presence of
wireless devices.
Wireless devices that may be in your system
are only qualified for use in Canada if an
Industry Canada ID number is on the system
label.
When using IEEE 802.11a wireless LAN, this
product is restricted to indoor use due to its
operation in the 5.15- to 5.25-GHz frequency
range. Industry Canada requires this product
to be used indoors for the frequency range of
5.15 GHz to 5.25 GHz to reduce the potential
for harmful interference to co-channel
mobile satellite systems. High power radar
is allocated as the primary user of the 5.25-
to 5.35-GHz and 5.65 to 5.85-GHz bands.
These radar stations can cause interference
with and/or damage to this device.
The maximum allowed antenna gain for use
with this device is 6dBi in order to comply
with the E.I.R.P limit for the 5.25- to 5.35 and
5.725 to 5.85 GHz frequency range in point-
to-point operation.
The power output of the wireless device (or
devices), which may be embedded in your
notebook, is well below the RF exposure
limits as set by Industry Canada.
Operation of this device is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
To prevent radio interference to
licensed service, this device is
intended to be operated indoors
and away from windows to provide
maximum shielding. Equipment (or
its transmit antenna) that is installed
outdoors is subject to licensing.
Wireless devices are not user
serviceable. Do not modify them in
any way. Modification to a wireless
device will void the authorization
to use it. Contact manufacturer for
service.