Samsung MX-T70, Руководство пользователя

Страница: 12 / 28

ENG - 6 ENG - 7
Connecting the wireless Group Play mode
You can connect up to ten Party Audio systems by wireless Group Play function.
GROUP PLAY
GROUP PLAY GROUP PLAY
Host
Slave 1
Slave 2
1. Press the GROUP PLAY button on the Host Party Audio system. The “ HOST ” message appears on
the display of the host Party Audio and the LED blinks on the GROUP PLAY button.
2. Press the GROUP PLAY button on the 2nd Party Audio system (Slave 1). The “ GROUP PLAY
CONNECTED ” message appears on the display and the GROUP PLAY button on both systems
stops blinking.
3. Press the GROUP PLAY button on the 3rd Party Audio system (Slave 2). The “ GROUP PLAY
CONNECTED ” message appears on the display and the GROUP PLAY button on the system stops
blinking.
4. If you want to add more Party Audio systems, repeat step 3.
5. Play music on the Host Party Audio. Sound output from all the connected systems.
NOTES
• The wireless Group Play connection is available for any Party Audio system.
• It may cause malfunction due to environment or other device effect.
• If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play
connection. Try step 1 to step 5 again.
• The ADD STEREO button and PAIRING button on the slave Party Audio systems are not available
while in wireless Group Play mode.
• Press and hold GROUP PLAY button before Group play connected, this Party Audio system will be
Host immediately.
• The ADD STEREO button on the host Party Audio system is not available while in wireless Group
Play mode.
How to use Audio Group
You can connect multiple audio systems in a group to create a party environment and to produce higher
sound output. Activate a system in the group and share the music. Other systems are grouped to play
Host’s music.
Connecting the wired Group Play mode
L
OUT
R
L
IN
R
AUX 2 / GROUP PLAY
L
OUT
R
L
IN
R
AUX 2 / GROUP PLAY
L
OUT
R
L
IN
R
AUX 2 / GROUP PLAY
1st
Party Audio Host
2nd
Party Audio
Last
Party Audio
Continue the
connection until
the last Party
Audio
Set up a Group Play by connecting all the systems using audio cables (not supplied). If the system has a
Group Play function, continue to connect several units. Use the
AUX or (Source) button to change
the source to AUX2 for every Party Audio systems except the 1st Party Audio system.
NOTES
• The 1st Party Audio Host can play music in any source.
• Depending on the length or characteristics of the cable, there may be a difference in operating
distance.