ENG - 10
ENG - 11
•
In mode other than “
BT
” (ex.
USB
,
AUX
mode), music is played only in MAIN Sound Tower and music
is not played in SUB Sound Tower.
•
The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary.
•
The Bluetooth device has the same name as MAIN Sound Tower and SUB Sound Tower when
connected to the Bluetooth device, and only the MAIN Sound Tower can be connected.
•
This product does not support aptX audio stream with Stereo Group mode.
•
If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode
may fail.
Terminate the Stereo Group mode
Press the
ADD STEREO
button (MAIN or SUB) for at least 5 seconds after the Stereo Group is
connected.
•
No VFD display, voice prompt instead appears on the display and the LED above the
ADD STEREO
button is off.
LED Indications
LED
STATE
Description
Green
Blink
Waiting for a Stereo Group connection.
Solid
The Stereo Group connection is successful.
Red
Solid
There is an error with the Stereo Group connection.
Using Samsung TV and Stereo Group mode
Connect two Sound Tower by wire and use them with Samsung TV to enjoy stereo sound.
Left Sound Tower
(MAIN)
Right Sound Tower
(SUB)
1.
Refer to “
Using a Smartphone and Stereo Group mode
” to connect the two Sound Tower in a
Stereo Group.
2.
Connect the RCA cable to the
AUX2 OUT
on the MAIN and
AUX2 IN
on the SUB as shown by using
the RCA cable (not supplied).
3.
In “
BT
” mode, press the “
AUX
” button on the MAIN Sound Tower remote control for at least 5
seconds. LED indicator light flow display appears on the display.
4.
When the connection is complete, the third LED flashes appears in the display and then the current
output no VFD display, voice prompt instead.
5.
When the connection is complete, LED indicator light flow display message appears in the MAIN
Sound Tower display and a “
SUB
” appears in the SUB Sound Tower display.
•
The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the
right channel sound. Press the
ADD STEREO
button on the MAIN or SUB Sound Tower to
change the sound channel of the Sound Tower.
6.
Connect a TV and MAIN Sound Tower via Bluetooth to play music. Sound is output from both
Sound Tower.
NOTES
•
To use Stereo Group mode, both Sound Tower must be the same model.
•
A red light on the LED on the
ADD STEREO
button indicates an error in the Stereo Group
connection. Try Step 1 to 5 again.
•
In Stereo Group mode, the remote control,
BT PAIRING
,
GROUP PLAY
, and
(Source)
buttons on
the SUB Sound Tower are disabled.
• The
GROUP PLAY
button on the MAIN Sound Tower is not available in Stereo Group mode.
•
If Samsung TV supports a simple connection, the connection pop-up is automatically displayed on
the TV, and if you select “
Yes
”, it connects to the TV. If there is a previous connection history
between Samsung TV and Sound Tower, it will be connected to Samsung TV without pop-up. For a
simple connection to Samsung TV, refer to page 16.
•
The lighting colors may vary between the MAIN Sound Tower and the SUB Sound Tower.
•
When connecting to a TV, the names of the MAIN and SUB Sound Tower are the same in the
Bluetooth list on the TV, and only the MAIN Sound Tower can be connected.
Terminating the Stereo Group mode connection
Press the
ADD STEREO
button (MAIN or SUB) for at least 5 seconds after the Stereo Group is
connected.
•
“
OFF-STEREO MODE
” appears in the display and the LED on the
ADD STEREO
button turns off.
Содержание MX-ST50B
Страница 1: ...MX ST50B USER MANUAL...
