Samsung MX-E850, Руководство пользователя

Страница: 11 / 20

10
English English
10
English
11
Checking or Editing the
Programmed Tracks
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. While in CD playback mode, press the
STOP
(
@
)
button to stop playing the CD.
2. Press the ENTER
( )
button to display the
message below:
(01= program number, --= track number)
3. Use the
[
or
]
button to move to a desired
track.
• Press
[
to move to the previous track.
• Press
]
to move to the next track.
4. Press the ENTER
( )
button to confirm your
selection, the selection is stored and
is displayed.
5. To select a different track, following the steps 3
to 4 above.
6. Press the PLAY (
+
) button to play the
programmed tracks.
7. Press the STOP (
@
) button to stop playing the
programmed tracks, Press the STOP (
@
) button
again to cancel playing the programmed tracks.
• If you open the disc tray or turn off the
product, your programming will be canceled.
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (
@
) button once.
2. Press the ENTER
( )
button twice to display
the message below:
(C=Check, 01= program number)
3. Repeat pressing the ENTER
( )
button until
the desired track is displayed.
4.
Press the
[
or
]
button to select a different
track.
5. Press the ENTER
( )
button to confirm your
selection.
6. To play the programmed tracks, press the
PLAY ( + ) button.
You can circularly play between the disc and the
USB.
1. Press the
AUTO CHANGE
button on the main unit.
Each time press this button, the mode will switch as
following:
AUTO CHANGE OFF
;
AUTO CHANGE ON
• When the auto change mode is "ON", the music will be
played on
DISC1 ➝ DISC2 ➝ DISC3 ➝ USB1 ➝ USB2
continuously.
• When the auto change mode is "ON", if you press
the POWER button, function change button or the
OPEN/CLOSE button, the auto change function
automatically switches to "OFF" mode.
• When USB is playing, if you disconnected the USB,
the auto change function automatically switches to
"OFF" mode.
• When the auto change mode is "ON", the recording
can't work.
• When the auto change mode is "ON", the REPEAT,
SLEEP function can't work and automatically changes
to OFF.
• When the auto change mode is "ON", the REC
SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE
and SLEEP function can't work.
• If there's no DISC or no USB, it will jump to next
DISC or USB. (For example, the DISC1 plays end, if
the DISC 2/3 has no disc, it will jump to play USB1
music.)
Auto Change Function
10 Skip Function
CD Programming
Press the +10 or -10 button while in playback mode.
This will skip the tracks as many as 10 or -10 from
the current track.