Samsung MWR-WS00, Руководство пользователя

Страница: 7 / 22

E-
7
ENGLISH
Selecting the Cooling Mode
Select the cooling mode to lower the room temperature.
1
Press the (ON/OFF) button to turn on the indoor unit.
(Do not press the (ON/OFF) button if the remote
controller is on).
Result:

The air-conditioner will be turned on with the
mode selected when the unit was last used.
Caution The air-conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:

Plugged in

Stopped
The air-conditioner will start up after 3 minutes.
2
To select the COOL mode, press the button until Cool is
displayed on the remote controller.
Result: The air-conditioner will run in cooling mode.
3 To adjust the temperature, press the buttons to set
the desired temperature.
The temperature can be set between 18°C and 30°C.
Result:

The temperature is adjusted by 1°C when
the buttons are pressed.

The air-conditioner will start cooling if
the temperature set is lower than the room
temperature.

The fan will run even if the temperature set is
higher than the room temperature.
4 Select the fan speed by pressing the button.
5
To adjust the airflow direction, refer to page 13.
Note Cooling and heating mode cannot be selected at
the same time.
MWR-WS00_IB_E_25179.indd 7 2006-03-28 ｿﾀﾈﾄ 3:26:48