Samsung MWR-WH00, Руководство по обслуживанию

Страница: 12 / 24

Product Specifications
Samsung Electronics 2-9
2-4-2 Installing the Wired Remote Controller
1) Open the wired remote controller by pushing up the top cover of the remote controller while holding the rear cover
firmly.
• The wired remote controller opens in the way of slide.
2) Install the rear cover of the wired remote controller on the wall with the supplied screws.
After that, arrange the power cables on rear side of the front cover.
3) Connect the yellow and orange wires from the wired remote controller to the V1 and V2 terminal of the indoor unit.
Connect the red and blue wires to the F3 and F2.
4) Reassemble the wired remote controller.
• When you reassemble the wired remote controller, match the grooves on the left side.
front cover

Before fixing the rear cover,
clear 30mm of space on the top
and 60mm on the right side.
more than 60mm
rear cover
more than 30mm
●
Connector type cable connection
- Using the provided indoor unit communication
cable, connect to the housing.
●
Terminal type cable connection
Housing
Tighten the
cable with the
wire joint
(accessories)
tightly.
Indoor unit
Wired remote
controller
F3 F4
Power cable
(V1, V2)
Communication
cable(F3, F4)
Indoor unit
Wired remote
controller
Communication
cable(F3, F4)
Power cable
(V1, V2)
screw
hole

Fasten the screw in the
screw hole.
MWR-WH00_31329A(1)_1.indd 9 2009-12-01 ｿﾀﾈﾄ 5:04:50