background image

3

EN

G

LIS

H

CAUTION

Do not install the product where there’s combustible gas.

  Potential risk of fire and explosion.

Ensure no water gets into the Wired Remote Controller.

  Potential risk of electric shock or fire.

Install the air conditioner away from direct exposure to sunlight, in room temperature range of 0°C(32°F)~39°C(102°F).

  Potential risk of electric shock or malfunction.

Do not handle the product with sharp objects.

  Potential risk of electric shock or product damage.

Do not install the product in areas exposed to oil or vapor.

  Potential risk of product damage or malfunction.

Do not put undue stress on the power cable.

  Potential risk of broken cable and fire.

Do not install the product in areas with frequent use of acid or alkali spray.

  Potential risk of electric shock or product malfunction

Do not connect power cable to a communication terminal.

  Potential risk of fire.

Be cautious not to interfere any other electrical devices if the product is installed in a place such as hospital.

  Potential risk of product malfunction.

MWR-WE10_E_IM_32811-1.indd   3

2010-12-09   오후 4:41:02

Содержание MWR-WE10

























Отзывы: