ENGLISH-6
Wired remote controller installation
Wired remote controller installation
1 . Insert a small flat head screwdriver into the square groove in the bottom of your wired
remote controller, and then pull up the front cover to separate it from the rear cover .
2 . Arrange the communication cable so that they fit in the housing along the edges of the rear cover .
Remove it
< When the cable is not concealed >
< When the cable is concealed >
5 cm (2 inch)
5 cm
(2 inch)
MWR-SH10N_IM_DB68-05567A-01_EN.indd 6
2015/11/19 19:44:10
