E-
10
Selecting the Fan Mode
Select the Fan mode to circulate air without changing the
temperature.
1
Press the
(ON/OFF) button to turn on the indoor unit.
(Do not press the
(ON/OFF) button if the remote
control is on).
Result:
The air conditioner will be turned on with the
mode selected when the unit was last used.
Caution
The air conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:
Plugged in
Stopped
The air conditioner will start up after 3 minutes.
2
To select the Fan mode, press the
button until is
displayed on the remote control.
Result:
The air conditioner will run in Fan mode.
3
To adjust the fan speed, refer to page 11.
Note
When the air conditioner is operating in the fan
mode, you can not select the automatic fan speed.
MWR-SH00_IB_E_28134.indd 10
2007-06-22 ｿﾀﾈﾄ 2:07:52
