Samsung Msys 6800 Скачать руководство пользователя страница 51

Страница: 51 / 118

Samsung Electronics

4-21

Maintenance & Troubleshooting

4-4 Malfunction

Error Status

Check

Solution

No power

Fuser Error

Cover open

Jam 0

Jam 1

1. If supplying power differs from machine’s

power rating, replace the machine.

2. Replace it.

1. Detach AC connector and measure the

resistane between pin 1 and 2. If it is megohm,
thermostat is open, Replace it.

2. Check bad connector contact or wire is cut.
3. Check thermistor wire and its connection.
4. Replace Engine board

1. Open top cover and press the lever with pen. If

Controller detects cover close, there is some
mechanical trouble in top cover and lever’s
assembly. If not so there is electrical problem.

1. Check whether solenoid is working or not by

using Engine test mode #0 (Acoustic judgement)

2. Check feed sensor malfunction.

Check if it is misplaced with paper width
sensor.

3. Re-try inserting a fewer papers.

•fan the papers and align
•take out the loaded papers and insert

them reverse direction

4. Take out the loaded papers and insert them

reverse direction
•inserted papers as recommended for

Manual Feeding?

•When loading, tap the papers until paper

detect sensor senses loading

5. When using long papers, use the Stacker

Extender

6. Adjust Guide to fit the paper width

1. It is mostly resulted from double feeding.

Check paper is well stocked in feeder.

2. Check feed actuator position and actuator’s

operating. There may be stiff movind or double
reflection. If not so, check the operation of feed
sensor by Engine test mode #2.

3. Check exit lever operation. Remore jam and

check actuator moving by hand. If actuator is
too stiff, paper is wrapped around the heat
roller. Remove obstacles or replace.

1. Check power is supplying
2. Check fuse F1 open

1. Thermostat open
2. AC wire open
3. Thermistor wire open
4. Engine Controller

1. When close Top cover, check the

lever is pressed

2. Micro switch’s contact
3. CPU and related circuit

Check where Jam 0 happens
1. Paper is not picked up
2. Paper is located in feed sensor
3. Happened when inserting specific

papers such as envelope into the
MPF (Multipurpose Paper Feeder)?

4. Happened when inserting specific

papers such as envelope into the
Manual Feeder?

5. Is the Stacker Extender is folded out?
6. Does not the Guide Adjust distort the

papers

Paper is stopped in just after of fuser
unit.

Содержание Msys 6800























































































































Результаты поиска

Содержание Msys 6800

Отзывы:

Бренды по названию

Популярные бренды

Samsung Msys 6800, Руководство по обслуживанию

Результаты поиска

Содержание Msys 6800

Отзывы:

Бренды по названию

Популярные бренды