Samsung Msys-5100P, Руководство по обслуживанию

Страница: 30 / 192

4-14 Samsung Electronics
Disassembly and Reassembly
4-22 Holder-pad
1. Before you remove the holder-pad, you should
remove:
– All covers (see page 4-3, 4-9)
– LSU (see page 4-10)
– Plate upper (see page 4-12)
– Knock-up ass’y (see page 4-13)
– Cap-Pad (see page 4-13)
2. Remove the holder-pad from the main frame.
4-23 Motor ass’y
1. Before you remove the motor ass’y, you should
remove:
– All covers (see page 4-3, 4-9)
2. Remove five screws securing the motor ass’y and
unplug one connector from the engine board,
then remove the motor ass’y.
Note: When you reassemble the motor ass’y, make
sure that the bosses shown in the figure
below fit into the corresponding screw holes
on the motor ass’y to allow the screws to be
fastened properly.
Boss