7
Operation
Turning on the Power and Selecting a Weight
The first time you plug the power cord into an outlet, or after there has
been an interruption in power, the display shows “
” At this point,
you can select the weight system for the display. You can choose
between pounds (LBS) or kilograms (KG). To do so,
1
Press
“0”
immediately after plugging in your microwave. The
display will show “Gr”.
If the display does not shows “Gr”, you will need to unplug the
microwave and then plug it in again in order to change to the weight
selection.
2
Press
“0”
repeatedly to select the weight system you wish to use.
When you have selected the weight system you want to use, press
the
PAUSE/CANCEL
button to end this procedure.
Setting the Clock
1
Press the
Clock
button.
2
Use the number buttons to enter the current time. You must press
at least three numbers to set the clock. If the current time is 5:00
enter, 5,0,0.
3
Press
Clock
again. A colon will blink, indicating that the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by
pressing the
Clock
button.
Using the Pause/Cancel Button
The
Pause/Cancel
button allows you to clear instructions you have
entered. It also allows you to pause the oven’s cooking cycle, so that
you can check the food.
•
To pause the oven during cooking: press
Pause/Cancel
once. To
restart, press
Start
.
•
To stop cooking, erase instructions, and return the oven display to
the time of day: press
Pause/Cancel
twice.
•
To correct a mistake you have just entered: press
Pause/Cancel
once, then re-enter the instructions.
MR1034CWC_XAA_GB_02981A.fm Page 7 Tuesday, July 6, 2004 1:14 PM
