GB
13
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing FUNC. button.
3
Select the required frequency band by pressing Band button.
Result:
The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW
Long Wave
4
To search for a
Press Tuning Mode button
station...
on the front panel....
Manually
One or more times until MANUAL is displayed.
Automatically
One or more times until AUTO is displayed.
5
Select the station to be stored by:
Pressing Tuning
õ
or
ö
on the front panel
or
Pressing Tuning
õ
or
ö
on the remote control
To scroll through the frequencies faster when searching
manually, hold down the Tuning
õ
or
ö
buttons.
The automatic search procedure may stop on a frequency
that does not correspond to a radio station. If this happens,
use the manual search mode.
You can check and change your selection of tracks at any time.
You must have selected at least one track.
1
Press STOP (
■
) once if you have started listening to the
selection.
2
Press Program/Set.
Each time you press Program/Set, the next selection
is displayed.
3
Press Program/Set one or more times until the track to be
changed is displayed.
4
Press SKIP I
or
I to select the new track and press
Program/Set .
5
Press CD (
ˆ ¨
) to start listening to the selection.
Result:
The first track selected is played.
You can change one or more tracks in your initial selection.
Checking and Changing Programmed Tracks
Searching for and Storing the Radio Stations
CD/TAPE/MP3
Band
Function
Last Memory
2 3
5
1
4
4
Volume
FUNC.
CD/TAPE/TUNING
R
Tuning Mode
CD Repeat
Preset EQ
+10 (CD)
Record
PTY
Display
Start/Stop
Band
PROG./Set
Last Memory
CD Synchro
Tape Repeat A<—>B
Track/Album
MP3
Band
2
3
1
5
4
5
Programming the Order of Playback
*
This function dose not operate in the MP3-CD.
You can decide for yourself:
The order in which you listen to the tracks
The tracks to which you do not wish to listen
This feature can be combined with the Repeat function.
1
If necessary, stop the player by pressing STOP (
■
).
2
Press Program/Set.
Result: PROGRAM and
P -- 0 1 ----
are displayed.
3
Select the required track by pressing the SKIP buttons:
I
to move backwards through the tracks
I to move forwards through the tracks
4
Press Program/Set.
Result:
P -- 0 2----
is displayed.
5
To select other tracks, repeat Steps
3
and
4
.
You can programme up to 24 tracks.
6
When you have finished selecting the tracks, press CD (
ˆ ¨
)
to start listening to the selection, in the order in which the
tracks were programmed.
7
Press STOP (
■
) twice to cancel the selection when the disc is
playing.
CD/TAPE/MP3
Mono/ST.
Band
Function
Tape
Mode
Program/
Set
Last Memory
Repeat
2 4
6
3
3
1 7