Example: Storing the service name "ALPHA1" to the service number 3
Press TUNER/BAND to select "
DAB
".
• Each time you press the button, the mode changes as follows:
FM
➝
MW
➝
LW
➝
DAB
.
Press
/
to select the service.
• Press
/
to change the ensemble.
Press PROGRAM/SET button.
• "
PRGM
" will blink on the display.
Press
/
to select the service number to which the
service will be stored .
• You can select a service number from1 to 6 .
Press PROGRAM/SET button .
• "
PRGM
"disappears from the display and the station will be stored .
• Press the PROGRAM/SET button before "
PRGM
"disappear from the
display .
Repeat steps 2 to 5 to store other stations.
1
2
3
4
5
6
Storing DAB Stations
DAB Related Functions
Press INFO.
• Each time you press the button during reception, the mode
changes on the display as follows:
• Depending on the service information , the display may vary or
does not work.
17
You can store up to 6 DAB stations.
Information Display Function
You can check various information about the service being received.
Tuning in to a Stored DAB Station
• Press 1~6 on the remote control to select the stored station .
• If no station is stored when you press 1~6, "
NO MEMORY
" will
appear on the display.
DLS (Dynamic Label Segment):
Teletext Display
This function may not work
depending on the service area and
broadcasting circumstances.
Ensemble Label
Frequency
Bit Rate
• With the DAB function selected, press STOP on the main unit for
longer than 5 seconds.
• "
DAB RESET
" blinks on the display,then "
PUSH TUNE
"
flash on the display. and the DAB function will be reset
to the default setting.
• Once you have initialized DAB, you need to press the TUNE button
to search the services again.
To Initialize DAB
• If no button is pressed for 7~8 seconds, you will be exited from
the Information Display function.
• Small letters and some special characters (
Ω
, /, =, ?) cannot be
displayed.
Program Type (Pop, Classic,
Rock, etc)
GB
1
3,5
2,4
2,4
2
MM-ZJ8(GB)DAB 9/16/04 8:35 Page 17
