background image

GB

16

The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off
automatically, you must cancel the timer.

Before setting the timer, check that the current
time is correct.

For each step, you have a few seconds to set
the required options. If you exceed this time, 
you must start again.

1

Switch the system on by pressing On/Standby.

2

Press Timer/Clock until 

TIMER is displayed.

3

Press Program/Set.
Result:

ON TIME is displayed (instead of the equalizer
symbols) for a few seconds, followed by any
switch-on time already set; you can set the timer
switch-on time.

4

Set the timer switch-on time.

a

Set the hour by pressing Tuning

õ

and 

ö

.

b

Press Program/Set.
Result:

The minutes flash.

c

Set the minutes by pressing Tuning

õ

and 

ö

.

d

Press Program/Set.

Result:  OFF TIME is displayed (instead of the equalizer

symbols) for a few seconds, followed by any
switch-off time already set; you can now set the
timer switch-off time.

5

Set the timer switch-off time.

a

Set the hour by pressing Tuning

õ

and 

ö

.

b

Press Program/Set.
Result: The minutes flash.

c

Set the minutes by pressing Tuning

õ

and 

ö

.

d

Press Program/Set.

Result: VOL XX is displayed, where XX corresponds to

the volume already set.

6

Press Tuning

õ

and 

ö

to adjust the volume level and press

Program/Set.
Result:

The source to be selected is displayed.

7

Press Tuning

õ

and 

ö

to select the source to be played

when the system switches on.

If you select...

You must also...

TAPE (cassette)

Insert a recorded cassette in one of
the decks before setting the system
to standby.

TUNER (radio)

Select the FM or AM frequency

band by pressing Tuning Mode

õ

and 

ö

.

Press Program/Set.
Select a preset station by pressing 

Tuning Mode

õ

and 

ö

.

CD (compact disc)

Load a compact disc.

8

Press On/Standby to set the system to standby mode.
Result:

is displayed to the bottom left of the time, indicating

that the timer has been set. The system will switch on
and off automatically at the required times.

If the timer switch on and off times are identical, the word
ERROR is displayed.

After having set the timer, it will start automatically as shown by
the 

indication on the display. If you no longer wish to use the

timer, you must cancel it.

You can cancel the timer at any time (system on or in standby
mode).

To...

Press Timer On/Off...

Cancel the timer

Once.
Result:  

is no longer displayed.

Restart the timer 

Twice.
Result:  

is displayed again.

Timer Function

Cancelling the Timer

On/Standby

Sleep

CD/TAPE/MP3

Mono/ST.

Band

Function

Tape

Mode

Program/

Set

Repeat

Timer

on/off

Timer/

Clock

Preset

EQ

Power

Sound

Mute

VOL.

VOL.

Tuning

Mode

6

6

7

7

4

4

5

5

6 7

4

3

5

2

1 8

On/Standby

Sleep

CD/TAPE/MP3

Mono/ST.

Tape

Mode

Program/

Set

Repeat

Timer

on/off

Timer/

Clock

Preset

EQ

Power

Sound

Mute

 MM-L5000-NO RDS(GB)  5/19/03 19:16  Page 16

Содержание MM-L5000






















Отзывы: