GB
16
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time,you must start again.
Switch the system on by pressing Standby/On ( ).
Press Timer/Clock until TIMER is displayed.
Press PROGRAM/SET.
Result:ON TIME is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by pressing
and
.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
and
.
d Press PROGRAM/SET.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
Set the timer switch-off time.
a Set the hour by pressing
and
.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
and
.
d Press PROGRAM/SET.
Result: VOL 10 is displayed, where 10 corresponds to the volume already
set.
Press
and
to adjust the volume level and press
PROGRAM/SET.
Result:The source to be selected is displayed.
Press
and
to select the source to be played when the system
switches on.
If you select...
You must also...
TAPE (cassette) ........................
•
Insert a recorded cassette in the deck.
TUNER (radio) ..........................
•
Select the FM or AM (MW/LW) frequency
band by pressing
and .
•
Press PROGRAM/SET.
•
Select a preset station by pressing
and
CD (compact disc).......................Load a compact disc.
Press PROGRAM/SET to confirm the timer.
Press Standby/On to set the system to standby mode.
Result:
is displayed on the top right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can use
/
button on the front panel instead of
/
button on the remote control in step 4,5,6,7.
After having set the timer, it will start automatically as shown by
the timer indication on the display. If you no longer wish to use
the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press TIMER ON/OFF...
Cancel the timer........................... Once.
Result:
is no longer displayed.
Restart the timer.......................... Twice.
Result:
is displayed again.
Timer Function
Cancelling the Timer
1
3
4
5
6
7
8
2
CD
TA P E
TUNER
BAND
MO/ST
TIMER/CLOCK
TIMER ON/OFF
AUX
PROGRAM/SET
REP. A B
SLEEP
EQ/S.BASS
TAPE SPEED
REPEAT
TUNING
MODE
VOLUME
TUNING
MUTE
+10
REV.MODE
SHUFFLE
COUNTER RESET
9
1,9
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
TUNER
BAND
MO/ST
TIMER/CLOCK
TIMER ON/OFF
AUX
PROGRAM/SET
REP. A B
SLEEP
EQ/S.BASS
TAPE SPEED
MUTE
REV.MODE
SHUFFLE
COUNTER RESET
MM-J4-RDS(GB no) 9/19/04 9:21 Page 16