Samsung MM-E430D, Руководство пользователя

Страница: 29 / 41

28
English English
29
04
Basic Functions
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the
POWER button.
2. Press TIMER/CLOCK button and then press
the ENTER button.
Result: "CLOCK" is displayed.
3. Press
ENTER
.
Result: The hour flashes.
` Increase the hours: ▲
`
Decrease the hours: ▼
4. When the correct hour is displayed, press
ENTER .
Result: The minutes flashes.
` Increase the minutes: ▲
`
Decrease the minutes: ▼
5. When the correct minute is displayed, press
ENTER.
Result: " TIMER" appears in the display.
` The current time is now set.
✎
NOTE
`
You can display the time, even when you are using another
function, by pressing the TIMER/CLOCK button once.
`
You can also use [ or ] on the front panel instead of
▲
,
▼
buttons in step 3,4.
Timer Function
The timer enables you to switch the system on or off
at specific times automatically.
` Before setting the timer, check that the current time
is correct.
` For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
`
If you no longer want the system to switch on or off
automatically, you must cancel the timer by pressing
the TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the
POWER button.
2.
Press the TIMER/CLOCK button and then
press ▲ or ▼ buttons until TIMER is
displayed.
3. Press the ENTER button.
Result: ON is displayed for a few seconds, you can set
the timer switch-on time.
4. Set the timer switch-on time.
a Press the ▲
or
▼ button.
b Press the ENTER button.
Result: The minutes flash.
c Press the ▲ or ▼ button.
d Press the ENTER button.
Result: OFF is displayed for a few seconds, you
can now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the ▲
or
▼ button.
b Press the ENTER button.
Result: The minutes flash.
c Press the ▲ or ▼ button.
d Press the ENTER button.
Result: VOL XX is displayed, where XX
corresponds to the volume already set.
6. Press
▲
or
▼
button to adjust the volume level
and press the ENTER button.
Result: The source to be selected is displayed.
7. Press the
▲ or ▼
button to select the desired source
to be played when the system switches on.
` FM (radio) : a Press the ENTER button.
b Select a preset station by press the ▲
or ▼
button.
` DVD/CD (compact disc): Load one audio CD.
` USB : Connect the USB device.
TIMER
CLOCK
TIMER
CLOCK