28
English
Basic Functions
Timer Function
The timer enables you to switch the system on or off
at specific times automatically.
Before setting the timer, check that the current time
is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing
TIMER ON/OFF
button.
Example: You wish to wake up to music every morning.
1.
Switch the system on by pressing the
POWER
button.
2.
Press the
TIMER/CLOCK
button and then
press
◄
or
►
buttons until
TIME
is displayed.
3.
Press the
ENTER (
)
button.
Result:
ON
is displayed for a few seconds,you can set
the timer switch-on time.
4.
Set the timer switch-on time.
a
Press the
◄
or
►
button.
b
Press the
ENTER (
)
button.
Result: The minutes flash.
c
Press the
◄
or
►
button.
d
Press the
ENTER (
)
button.
Result:
OFF
is displayed for a few seconds, you
can now set the timer switch-off time.
5.
Set the timer switch-off time.
a
Press the
◄
or
►
button.
b
Press the
ENTER (
)
button.
Result: The minutes flash.
c
Press the
◄
or
►
button.
d
Press the
ENTER (
)
button.
Result:
VOL XX
is displayed, where
XX
corresponds to the volume already set.
6.
Press
◄
or
►
button to adjust the volume level
and press the
ENTER (
)
button.
Result: The source to be selected is displayed.
7.
Press the
◄
or
►
button to select the desired
source to be played when the system switches on.
FM (radio) :
a
Press the
ENTER (
)
button.
b
Select a preset station by press the
◄
or
►
button.
DVD/CD : Load one Audio disc.
USB : Connect the USB device.
8.
Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
9.
Press the
ENTER (
)
button.
Result: REC N is displayed, you can press the
◄
or
►
button to select the REC Y or REC N, and then press
ENTER button.
1).
If you select the REC N, it will cancel tuner timing
recording even if you have already set the tuner
timing recording.
2).
If you select the REC Y, you can set the tuner timing
recording.
a.
Press the
ENTER (
)
button.
Result:
ON
is displayed for a few seconds, you
can set the tuner timing recording switch-on time.
b.
Press the
ENTER (
)
button.
Result:
OFF
is displayed for a few seconds, you
can set the tuner timing recording switch-off time.
✎
NOTE
The maximal tuner timing recording time is 5 hours.
If the timer switch on and off times are identical, the
word
ERROR
is displayed.
If the switch-on or -off time is the same as the timing
recording time, only the switch-on or -off time is
effective, and the timing recording time is not applied.
If there is no disc or usb, when you select the “DVD/CD,
USB, it will automatically change to “TUNER”.
If the auto timer is turned on, the DVD/CD or USB function
may require an additional step to be activated depending on
the disc (or device). So it is better for you to select the tuner
function instead.
Cancelling the Timer
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you can cancel it.
1.
To cancel the timer, press
TIMER ON/OFF
once.
Result:
is no longer displayed.
2.
To resume the timer, press
TIMER ON/OFF
again.
Result:
is displayed again.
MM-E320D-E330D-ENG-20120113.indd 28
MM-E320D-E330D-ENG-20120113.indd 28
2012-3-29 17:32:51
2012-3-29 17:32:51
