GB
25
24
B
You can turn the sound off temporarily on your system.
Example:
You wish to answer a telephone call.
Press
MUTE ( )
.
To switch the sound back on (at the same volume as before), press
MUTE
again or the
VOLUME
buttons.
2
1
MUTE Function
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example:
You wish to go to sleep to music.
Press
SLEEP
or
MULTI JOG(PUSH ENTER)
button until the option
is selected .
Result: The following indications are displayed:
Press
SLEEP
one or more times or turn
MULTI JOG(PUSH ENTER)
knob to indicate how long the system should continue playing before
it switches off:
At any time, you can:
Check the remaining time by pressing
SLEEP or MULTI
JOG(PUSH ENTER).
Change the remaining time by repeating Steps
1
and
2.
To cancel SLEEP function, press
SLEEP
or turn
MULTI JOG(PUSH
ENTER)
knob one or more times until
OFF
is display.
Setting the System to Switch off
Automatically
1
2
3
90
MIN
90 MIN 60 MIN 45 MIN
OFF SLEEP 15 MIN 30 MIN
You can connect a set of headphones to your micro
component system so that you can listen to music or radio
programmers without disturbing other people in the room.
The earphones must have a 3.5
ø jack or an appropriate
adapter.
Connect the headphones to the
PHONES
jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
Connecting Headphones
To obtain the best possible results from your micro compo-
nent system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Compact Disc Player
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
Press
PUSH EJECT
(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
Cleaning Your Micro Component
System
1
1
2
2
The following diagrams illustrate the precautions to be taken
when using or moving your micro component system.
Safety Precautions
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to light-
ning could damage the unit.
VOLUME
UP
DOWN
3
2
1
