GB
15
GB
14
You can set the system to switch off automatically.
Example:
You wish to go to sleep listening to music.
1
Switch your system on by pressing POWER.
2
Press the AI SLEEP button on the remote control.
Result:
The following indication is displayed:
AI SLEEP
3
Press AI SLEEP one or more times to indicate how long the system
should continue playing before it switches off.
Result:
The length of time is decreased as below each time
you press AI SLEEP.
AI SLEEP -> 90 -> 60 -> 45 -> 30 -> 15 -> OFF
At any time, you can:
Check the remaining time by pressing AI SLEEP.
Change the remaining time by repeating Steps
2
and
3.
4
To cancel the sleep timer function, press AI SLEEP one or more
times until the sleep indicator shows ‘
OFF
’.
You can turn the sound off temporarily on your system.
Example:
You wish to answer a telephone call.
1
Press MUTE on the remote control.
Result:
The sound is switched off.
2
To switch the sound back ON to the same volume as before, press
MUTE again.
Your micro component system is equipped with a bass amplification
system called SUPER BASS. This function makes the sound more
powerful and true-to-life.
1
Press S. BASS on the front panel.
Result:
The bass sound is boosted.
2
To cancel this function, press S. BASS again.
Your micro component system is equipped with a preset
equalizer that enables you to choose the most appropriate
balance between treble and bass frequencies, according to
the type of music to which you are listening.
Press the EQ PRESET button one or more times until the required option
is selected.
To obtain a...
Select...
Standard balance (linear)
FLAT
Balance suitable for pop music
POP
Balance suitable for rock music
ROCK
Balance suitable for classical music
CLASSIC
Result:
The corresponding indication is displayed.
(FLAT is not displayed)
AI Sleep Timer
Equalizer
Mute Function
Bass Amplification System (Super Bass)
1 2
1 2
4
1
3
2
The timer enables you to switch the player on and/or off at specific
times.
Example:
You wish to wake up to music every morning.
The timer can be used to start the radio, the compact disc
player or the cassette deck.
The timer is set by pressing the CD
or
buttons. You can hold them down to scroll
rapidly through the figures.
You can set the timer even when the player is in
standby mode (check, however, that the current
time is correct).
You can adjust the time whenever you want,
even when you are using another function, the
system is in standby mode, or when power is
off.
You must set the clock before you can
programme the system to switch on
automatically at a given time.
1
Press the TIMER/CLOCK button on the remote control three
times.
Result:
ON
is displayed and the hour flashes; you can now
set the timer switch-on time.
2
Press PROG/SET button.
3
Set the hours by pressing
and
.
to increase the hour
to decrease the hour
4
Press PROG/SET .
5
Set the minute by pressing
and
.
to increase the minute
to decrease the minute
6
Press PROG/SET.
Result:
OFF
is displayed and the hour flashes; you can set
the switch-off time.
7
Set the switch-off time by Repeating Steps 3 to 5.
8
Press PROG/SET.
Result:
VOL is displayed.
9
Adjust the volume by pressing
and
.
to increase the volume
to decrease the volume
10
Press PROG/SET.
Result:
Function is displayed.
11
Set the Adjust the Fucntion by Pressing
and
desired
Function(FM.CD.TAPE etc)
12
Switch the player off by pressing POWER.
Result:
The player will start at the time that you have set.
If you no longer want the player to switch on or off
automatically, you must cancel the timer function. To do
so, press TIMER ON/OFF.
Result: (
is no longer displayed and the timer is deactivated).
If the timer switch on and off times are identical,
the word
ERROR
is displayed. You must set the
timer again.
Timer Function-Playback
1
2 4 6 8 10
3 5
3
9
9 7
5
11
12
