manualshive.com logo in svg

Samsung ML-3050 Series, Руководство пользователя

Поделиться
Скачать
Samsung ML-3050 Series Скачать руководство пользователя страница 47

9

.9   

<Troubleshooting>

Tray 1 Open

The tray 1 is open 
and also there is no 
paper in the multi-
purpose tray.

Close the tray 1 or 
load paper in the 
multi-purpose tray.

Tray 1

Paper Empty

There is no paper in 
the tray 1.

Load paper in the tray 
1. See page 5.5.

Tray 2 Open

The optional tray 2 is 
open and also there 
is no paper in the 
multi-purpose tray.

Close the optional 
tray 2 or load paper in 
the multi-purpose 
tray.

Tray 2

Paper Empty

There is no paper in 
the optional tray 2.

Load paper in the 
optional tray 2. See 
page 5.5.

Message

Meaning

Suggested solutions

Solving general printing problems

For problems with the operation of your printer, refer to the table for 
suggested solutions.

Condition

Possible cause

Suggested solutions

The printer 
does not 
print.

The printer is not 
receiving power.

Check the power cord 
connections. Check the power 
switch and the power source.

The printer is not 
selected as the 
default printer.

Select

 Samsung ML-305x 

Series PCL 6

 or

Samsung ML-

305x Series PS

 as your default 

printer.

The printer cover 
is not closed.

Close the printer cover.

Paper is jammed.

Clear the paper jam. See 
page 9.1.

No paper is 
loaded.

Load paper. See page 5.4.

The toner 
cartidge is not 
installed.

Install the toner cartidge. 

The printer may 
be in manual feed 
mode and out of 
paper.

Check the display message, 
add paper to the multi-purpose 
tray, and press 

Stop

 (ML-3050) 

or 

OK

 (ML-3051N or ML-

3051ND) on the printer’s 
control panel.

The connection 
cable between 
the computer and 
the printer is not 
connected 
properly.

Disconnect the printer cable 
and reconnect it.

The connection 
cable between 
the computer and 
the printer is 
defective.

If possible, attach the cable to 
another computer that is 
working properly and try to print 
a document. You can also try 
using a different printer cable.

The port setting is 
incorrect.

Check the Windows printer 
setting to make sure that the 
print job is sent to the correct 
port. If the computer has more 
than one port, make sure that 
the printer is attached to the 
correct one.

Содержание ML-3050 Series






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды