manualshive.com logo in svg

Samsung MH052FDEA, Руководство по обслуживанию

Поделиться
Скачать
Samsung MH052FDEA Скачать руководство пользователя страница 20

19

Samsung Electronics

3. Disassembly and Reassembly

Stop operation of the air conditioner and remove the power cord before repairing the unit.

No

Parts

Procedure

Remark

1

Front Panel

1) Stop the air conditioner operation and 

shut off the main power.

2) Detach tape of Front Panel upper.

3) Slide the lower Front Grille down, then 

disassemble it by pulling it forwards.

4) Open the upper Front Grille by pulling right

and left sides of the Grille.

5) Take the left and right Filter out.
6) Loosen one of the right screw and detach

the Terminal Cover.

7) Detach the thermistor from the Front Grille.

8) Loosen 5 fixing screws of Front Grille.

9) Pull the lower left and right of discharge

softly for the outside cover to be pulled out.

3-1 Indoor Unit

3-1-1 MH020FPEA / MH023FPEA / MH026FPEA / MH035FPEA / MH18VP2-09 / MH19VP2-07 / MH19VP2-12

 DB98-20241A(2)_1  05/1/25 4:58 AM  Page 19

Содержание MH052FDEA















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды