E-
14
Cleaning Your Air Conditioner (Continued)
1
Open the front grille by pushing on both sides and center.
CAUTION
You must give attention when disassembling the front grille
and must check the safety clips have been installed.
If you do not check them, the front grille will drop suddenly
and you will be hurt.
2
Remove the front grille.
2-1 Remove the safety clips.
2-2 Open the front grille about 45° and pull it forward.
3
Pull out the air filters.
4
Remove all dust on air filters with a vacuum cleaner or a brush. In case of
serious dust accumulation, put the air filter in warm detergent water and
shake it vertically.
Note
When you have installed the Bio-Pure filter, do not allow any
liquids to contact the filter. It may lose its properties.
5
After washing, allow them to dry throughly in an area protected from sunlight.
6
When you have finished, insert the air filters into the front grille.
7
Clean the unit with a vacuum cleaner or a brush once a month.
8
Reinstall the front grille and the safety clips.
Note
You can use all 2 points of the indoor unit for installing the front
grille and the safety clips depending on your requirement.
Note
After cleaning the air conditioner, press the Filter Reset button.
4 way & mini 4way cassette
The design and shape are subject to
change according to the model.
Wired Remote Control
Wireless Remote Control
(TypeA)
Wireless Remote Control
(TypeB)
Cassette Type_E_26442.indd 14
2007-12-07 ｿﾀﾈﾄ 6:19:12
