E-
14
Selecting Heat Mode
You can select Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
1
Press the
(On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
Heat
is displayed.
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in Heat mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
:
Each time you press the
button:
- The temperature adjusts by 1°C
- The indoor unit beeps
If the room temperature reaches the set temperature
(selected temp5°C), the air conditioner stops
heating,but the fan is still operating.
The air conditioner starts heating, provided that the room
temperature is lower than the desired temperature
(selected temp3°C).
4
Press the
button to select the fan speed until the required setting is
displayed.
Auto
Low
Medium
High
Result
:
Each time you press the
button, the indoor unit beeps.
For the first 3~5 minutes, the fan may not operate to prevent
cool air from flowing out of the indoor unit.
This helps to warm the air in your room sufficiently.
5
To control the airflow direction, refer to page 20.
FJM_VIVACE_IB_DB98-29039A_E.indd 14
2007-12-12 15:02:07
