English - 7
English - 6
01
SAFET
Y INFORMA
TION
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
For your personal safety, plug the cable
into a proper AC earthed socket.
Do not install the microwave oven in hot or
damp surroundings like next to a traditional
oven or radiator. The power supply
specifications of the oven must be respected
and any extension cable used must be
of the same standard as the power cable
supplied with the oven. Wipe the interior and
the door seal with a damp cloth before using
your microwave oven for the first time.
CLEANING YOUR MICROWAVE OVEN
The following parts of your microwave oven
should be cleaned regularly to prevent
grease and food particles from building up:
• Inside and outside surfaces
• Door and door seals
• Turntable and Roller rings
(Turntable type model only)
ALWAYS
ensure that the door seals are
clean and the door closes properly.
EDM and arc welding equipment.
For Class B equipment is equipment
suitable for use in domestic establishments
and in establishments directly connected
to a low voltage power supply network
which supplies buildings used for domestic
purposes.
INSTALLING YOUR MICROWAVE OVEN
Place the oven on a flat level surface 85 cm
above the floor. The surface should be strong
enough to safety bear the weight of the oven.
1.
When you install your oven,
make sure there is adequate
ventilation for your oven by
leaving at least 10 cm (4 inches)
of space behind and, on the sides of the
oven and 20 cm (8 inches) of space above.
2.
Remove all packing materials inside the oven.
3.
Install the roller ring and turntable. Check
that the turntable rotates freely.
(Turntable type model only)
4.
This microwave oven has to be positioned
so that plug is accessible.
Failure to maintain the oven in a clean
condition could lead to deterioration of the
surface that could adversely affect the life
of the appliance and possibly result in a
hazardous situation.
1.
Clean the outside surfaces with a soft cloth
and warm, soapy water. Rinse and dry.
2.
Remove any splashes or stains on the
inside surfaces of oven with a soapy cloth.
Rinse and dry.
3.
To loosen hardened food particles and
remove smells, place a cup of diluted
lemon juice in the oven and heat for ten
minutes at maximum power.
4.
Wash the dishwasher-safe plate whenever
necessary.
DO NOT
spill water in the vents.
NEVER
use any abrasive products or chemical
solvents. Take particular care when
cleaning the door seals to ensure that no
particles:
• Accumulate
• Prevent the door from closing correctly
ME733K_XEU_DE68-04307A-01_EN.indd 7
2015-02-13 �� 11:15:17
