Samsung ME11A7510D, Руководство пользователя

Страница: 13 / 42

English 13
Se
tting up y
our ne
w micr
o
w
av
e o
v
en
Smart Control
To use the microwave oven’s Smart Control, you must download the SmartThings
app to a mobile device. Functions operated by the SmartThings app may not work
smoothly if communication conditions are poor or the microwave oven is installed
in a place with a weak Wi-Fi signal.
How to connect the microwave oven
1.
Download and open the SmartThings app on your smart device.
2. Follow the app’s on-screen instructions to connect your microwave oven.
3. To operate smart control function from the microwave oven, touch and hold
OK button for 3 seconds.
4. Once the process is complete, the icon appears on your microwave oven
display and the app will confirm you are connected.
5. If the connection icon does not turn on, follow the instruction on the app to
reconnect.
Microwave Oven remote control using the SmartThings app
Microwave Oven Monitoring Check the status of the microwave oven
Microwave Oven Remote Control Remotely control vent fan speed/cooktop
lamp
NOTE
For safety reasons, you cannot turn on the microwave oven remotely and you
must specify the cooking time to enable remote control.
Smart Control will not work properly if the Wi-Fi Connection is unstable.
NOTE
• If you change your mind while adjusting a setting, touch the STOP Eco button
to cancel, and then adjust the setting again.
• If there is a power interruption, you will need to reset these options.
• If the clock is set for standard time, the Daylight Savings Time Adjustment
function allows you to change the time easily without needing to reset the
clock.
Daylight Saving Time begins for most of the United States at 2 a.m. on
the first Sunday of April and reverts to Standard time at 2 a.m. on the last
Sunday of October.
• If the Filter Remind function is ON , the microwave will remind you to clean or
replace the grease filter every four months. When it is time to clean or replace
the grease filter, the microwave displays the “Filter” message to remind you to
clean or replace the grease filter. To remove the message, touch the number
0 when the microwave is in standby mode. If you don`t want to receive this
message, set the
Filter Remind function off in Options .