Samsung MCR-SMD, Инструкция по установке и эксплуатации

Страница: 7 / 10

7
English
Oper
ation
Setting the MDS Kit installation option
Set SEG23, the MDS Kit installation option of the indoor unit where the MDS Kit is installed, to the desired value with
referring to the table below.
Function
SEG23 Soft Off + Hard off SEG23 Soft Off only
0 Disuse
Standard
1 Off after 20 min. (from the last motion detection) 7 Off after 20 min.
2 Off after 40 min. 8 Off after 40 min.
3 Off after 80 min. 9 Off after 80 min.
Premium
4 Off after 20 min. A Off after 20 min.
5 Off after 40 min. B Off after 40 min.
6 Off after 80 min. C Off after 80 min.
SOFT OFF: The indoor unit turns off its operation at the indicated time in the table for Installation Option after its final
motion detection. But, it turns on again if the MDS detect motion.
HARD OFF: Designated time after SOFT OFF, it cannot turn on automatically when it detect motion. Users should control to
turn on the indoor unit with remote controller, etc.
NOTE
࡛ Detectable MDS area: 6 m radius at 2.7 m height.
࡛ When the air conditioner supports the Wind-Free Cooling function, it operates the Wind-Free Cooling function
automatically before the air conditioner turns off.
࡛ Ã˙̈ϩ˵ɇΧΧʪ͝ϑθʪΧʪɇϩʪʒ̷цϩ˵ɇϩϩ˵ʪđUƊç̈ϩऌϩЇθ͝ϑϩ˵ʪɇ̈θʀͱ͝ʒ̈ϩ̈ͱ͝ʪθͱ˙˙ɇ͝ʒͱ͝ࡥϩ˵ʪ̧̈ϩθʪʒЇʀʪϑϩ˵ʪϩ͔̈ʪϩɇ̧ʪ͝Ї͝ϩ̷̈ϩ˵ʪ
air conditioner is turned off for energy efficency.
࡛ In the Standard mode, you can only turn on/off the air conditioner.
࡛ In the Premium mode, you can also operate the functions such as turning on/off the air conditioner, comfort
temperature and comfort saving controls.
࡛ The MDS sensor may detect other heat sources, not humans, and perform the MDS functions.
MDS Button Click
Once Twice Three times
Standard Turn on Turn off -
Premium Indirect Flow Direct Flow Turn Off