18
Installing a Universal Comm. Kit
Installing EEV Assembly (Not provided)
1. Check that EEV Assembly is installed inside the indoor unit.
ࣞ Ɗ̈͝ʀʪʒʪиʀͱ͝ʒʪ͝ϑɇϩ̈ͱ͔͝ɇцͱʀʀЇθɇθͱЇ͝ʒϩ˵ʪkkǤϑϑʪ͔ɵ̷цΧ̈Χʪࡥ̈͝ϑϩɇ̷̷ϩ˵ʪkkǤϑϑʪ͔ɵ̷цɇϩɇΧ̷ɇʀʪ
where condensate water can be drained.
2. Check whether IN and OUT pipe connection is correct.
3. Essential to check the EEV Assembly main body is installed vertically.
ࣞ kkǤϑϑʪ͔ɵ̷ц͔ɇ̈͝ɵͱʒцϑ˵ͱЇ̷ʒɵʪ̈͝ϑϩɇ̷̷ʪʒӥϩ˵̈͝ϩ˵ʪθɇ͝˝ʪͱ˙ॐࢩࣛߣߧઘͱ˙ϑϩɇ͝ʒɇθʒ˙ͱθЭʪθϩ̈ʀɇ̷
̈͝ϑϩɇ̷̷ɇϩ̈ͱ͝Įϩ˵ʪθӥϑʪࡥϩ˵ʪθʪ̷̈ɇɵ̷̈̈ϩцͱ˙kkǤϑϑʪ͔ɵ̷цʀɇ͝͝ͱϩɵʪ˝Їθɇ͝ϩʪʪʒ
4.
̈уϩ˵ʪkkǤϩͱ̈͝ʒͱͱθЇ̈͝ϩѣӱ͝˝˝θͱͱЭʪѣθ̷͔цɇϑϑ˵ͱӥ͝͝ϩ˵ʪ͔̈ɇ˝ʪɵʪ̷ͱи
A
B
ࡤ²̈˝˵ΧθʪϑϑЇθʪΧ̈Χʪ˙θͱ͔ͱЇϩʒͱͱθЇ̈͝ϩ࣑ÃĘ࣒
ࣛÜɇ͔ʪϩʪθࡤףߣߤߩ͔͔࣑ߣࢩߤ࣭࣒
B: Low pressure pipe to indoor unit heat exchanger (OUT)
ࣛÜɇ͔ʪϩʪθࡤףߣߤߩ͔͔࣑ߣࢩߤ࣭࣒
࢜ Ã͝ʀɇϑʪͱ˙đǹU࣑ࣛߤߦࢩߦߢ࣒çߣߢߢkࡥʒ̈ɇ͔ʪϩʪθͱ˙࣑ࢩ9࣒̈ϑ߫ߧߤ͔͔࣑ߥࢩߪ࣭࣒
ߥߢঌ
Standard for vertical
installation
Standard for vertical
installation
ߥߢঌ
Insulator
Clamp (Work area for indoor unit
manufacturer)
Insulator (Work area for indoor unit
manufacturer)
Clamp
A
5. For checking EEV service, please attach a label sticker.
ॷ ϩϩɇʀ˵ͱ͝ʪ̷ɇɵʪ̷ϩͱЇΧΧʪθ͔̈ʒʒ̷ʪΧɇθϩͱ˙kkǤϑϑʪ͔ɵ̷цЭɇ̷Эʪɵͱʒцɇ͝ʒɇϩϩɇʀ˵ϩ˵ʪϑɇ͔ʪʀͱ̷ͱθͱ˙ɇ̷ɇɵ̷ʪ
sticker to valve wire housing.
6. Connect the EEV termial block to exact places on PCB according to set capacity.
ॷ Ǯ˵ʪ͝ϩ˵ʪθʪ̈ϑɇ͝kkǤࡤAͱ͝͝ʪʀϩkkǤࣛߣ
ॷ Ǯ˵ʪ͝ϩ˵ʪθʪɇθʪߤkkǤࣱϑࡤAͱ͝͝ʪʀϩkkǤࣛߣɇ͝ʒkkǤࣛߤ
ॷ Ǯ˵ʪ͝ϩ˵ʪθʪɇθʪߥkkǤࣱϑࡤAͱ͝͝ʪʀϩkkǤࣛߣࡥkkǤࣛߤࡥɇ͝ʒkkǤࣛߥ
ॷ Ǯ˵ʪ͝ϩ˵ʪθʪɇθʪߦkkǤࣱϑࡤAͱ͝͝ʪʀϩkkǤࣛߣࡥkkǤࣛߤࡥkkǤࣛߥࡥɇ͝ʒkkǤࣛߦ
Содержание MCM-D211UN
Страница 54: ......