Samsung MAYTAG WF316L Скачать руководство пользователя страница 9

Страница: 9 / 88

1-3

■ Grounding

►

Make sure to ground the unit to prevent

electric leakage or shock.

With a grounded receptacle

► It does not need an additional grounding.

■Water Drainage

► Hook the drain hose over the Wash Basin or Laundry

Tub or plug the end of the drai hose into the Standpipe
- Hook the drain hose over the Wash Basin or Laundry

Tub or plug the end of the drain hose into the Standpipe
- The outlet end of the drain hose must be at least

60-90 cm above the base of the machine.

► Seal the drain pipe connections
- If not, it may cause water leakage.

► Prevent water from siphoning away
- If the end of the drain hose is put in water, it could siphon

away water during washing.
So, make sure that the end of the drain hose is not put in

water.

Note: Caution must always be exercised to avoid collapsing

or damaging the drain hose.
For best performance the drain hose should not be

restricted in any way, through elbows, couplings or

excessive lengths.

1-2. Precautions upon Installation

Содержание MAYTAG WF316L

























































































Результаты поиска

Содержание MAYTAG WF316L

Отзывы:

Бренды по названию

Популярные бренды

Samsung MAYTAG WF316L, Руководство по обслуживанию

Результаты поиска

Содержание MAYTAG WF316L

Отзывы:

Бренды по названию

Популярные бренды