![Samsung MAX-KDZ150 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/samsung/max-kdz150/max-kdz150_instruction-manual_347787012.webp)
GB
11
The AM(MW)/LW aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM(MW)/LW
aerial connector terminals are located on the rear
of the system and are marked
AM(MW)/LW
.
To avoid noise interference, check that the loudspeaker wires
do not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM(MW/LW)
Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75
Ω
antenna to the
FM
antenna terminal.
Plug the connector on the
FM
aerial supplied into the coaxial sock-
et (75
Ω
) marked
FM
on the rear of the system.
Follow the instructions given on
Page 28
to tune into a radio sta-
tion, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor
FM
aerial to the
FM
socket on the
rear of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Aerial
Connecting to an External Source
This unit can output digital sound signals through this jack.
Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the DIGITAL OUT jack. Then,
connect an optical cable plug to the DIGITAL OUT jack.
When the DIGITAL OUT jack is not being used
Attach the supplied dust cap.
CD Digital Out Jack
The auxiliary input can be used to take advantage of the
sound quality of your Mini Component System when listening
to other sources.
Examples: A
television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main.
Connect the audio cable to the rear of the Mini Component System.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press Standby/On to
switch it on.
Select the AUX source by pressing AUX.
Result:
AUX
is displayed.
Switch the external source on.
1
2
3
4
5
Содержание MAX-KDZ150
Страница 39: ...MEMO 38 ...
Страница 40: ...THIS APPLIANCE IS MANUFACTURED BY AH68 01395A ...