ENG
16
15
Connecting External Components
Connecting the FM Antennas
VIDEO
FRONT -H
CENTER
FRONT -L SUBWOOFER
5.1CH SPEAKERS OUT
ANTENNA
IMPEDANCE
FRONT/CENTER/REAR:4 SUBWOOFER:3
R
R
FRONT -H
FRONT -L
R
R
REAR
REAR
R
L
FM (75 )
L
AUX IN 2
VIDEO OUT
HDMI OUT
COMPONENT VIDEO OUT
Y
PB
PR
R
ANTENNA
FM (75 )
FM Antenna (supplied)
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit could rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or
ventilation holes are covered with a newspaper or cloth, heat may build up
inside the unit and fire may result.)
Cooling Fan
FM antenna connection
1. Connect the FM antenna supplied to the FM 75
Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75
Ω
coaxial cable (with a standard type connector), disconnect the supplied FM
antenna.
CONNECTIONS
AUX1 : Connecting an External Component/MP3 player
VOLUME
AUX IN 1
MIC1
MIC2
MIC VOL
ECHO
TUNER
DVD/CD
USB
AUX
AUX1 : Front Panel
Audio Cable
(not supplied)
Components such as an MP3 Player
1
Connect AUX IN 1 (Audio) on the MINI COMPACT
front panel to the Audio Out of the external
component/MP3 player.
2
Press the AUX button to select <AUX1> input.
The mode switches as follows : AUX 1
➝
AUX 2.
FRONT -H
CENTER
FRONT -L SUBWOOFER
5.1CH SPEAKERS OUT
ANTENNA
IMPEDANCE
FRONT/CENTER/REAR:4 SUBWOOFER:3
R
R
FRONT -H
FRONT -L
R
R
REAR
REAR
R
L
FM (75 )
L
AUX IN 2
VIDEO OUT
HDMI OUT
COMPONENT VIDEO OUT
Y
PB
PR
R
AUX2 : Rear Panel
Audio Cable
(not supplied)
If the external analog
component has only
one Audio Out, connect
either left or right.
1
Connect AUX IN 2 (Audio) on the MINI COMPACT
rear panel to the Audio Out of the external analog
component.
■
Be sure to match connector colors.
2
Press the AUX button to select <AUX2> input.
The mode switches as follows : AUX 1
➝
AUX 2.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
• This unit does not receive AM broadcasts.