22
i.e. AP or Client Stations, is
good
,
adequate
or
poor
.
Link Quality:
This is the measure of the radio link. You can also visualize the connection
status by seeing the following three different colors of
Link Quality
.
•
Green Color:
The connection status is
good
. And the clients or AP should be able to
communicate without disturbance.
•
Yellow Color:
The connection status is
adequate
. In other words, you may
experience some problems while communicating.
•
Red Color:
The connection status is
poor
. You may not communicate with the other
clients or AP.
Signal Level:
This is the measure of the signal level. The measured signal level gives the
overall Link Quality and Connection Status.
Noise Level:
This is the measure of the noise level.
You can change the configuration by clicking on the
Configuration Change
. When you click
on the Configuration Change, you see the screen given below.
Configuration Change
screen allows you to set the parameters as explained below.
Net Mode:
You can set the Network Mode to Infrastructure or Ad-hoc.
SSID:
The SSID can be changed to any value. But that should be the same that of AP. In case
of Ad-hoc Mode, the SSID should be same for all clients.
TX Rate:
The transmission rate at which the data packets are transmitted by the client or AP.
You can set this to
Auto select 1 or 2Mbps
,
Fixed 1 Mbps
,
Fixed 2 Mbps
,
Fixed 5.5 Mbps
,
Fixed 11 Mbps
or
Full Auto (1 to 11 Mbps).
Important: You must know the TX Rate that your AP can support. Failure to which may
Содержание MagicLAN AP SWL-2100AP
Страница 2: ...SAMSUNG MagicLAN SWL 2100 User Manual ...
